Thread: [Lecture 5] Operators in C++

05242011 #1
[Lecture 5] Operators in C++
Once we know of the existence of variables and constants, we can begin to operate with them. For that purpose, C++ integrates operators. Unlike other languages whose operators are mainly keywords, operators in C++ are mostly made of signs that are not part of the alphabet but are available in all keyboards. This makes C++ code shorter and more international, since it relies less on English words, but requires a little of learning effort in the beginning.
You do not have to memorize all the content of this page. Most details are only provided to serve as a later reference in case you need it.
Assignment (=)
The assignment operator assigns a value to a variable.
Code:a = 5;
This statement assigns the integer value 5 to the variable a. The part at the left of the assignment operator (=) is known as the lvalue (left value) and the right one as the rvalue
The most important rule when assigning is the righttoleft rule: The assignment operation always takes place from right to left, and never the other way:
(right value). The lvalue has to be a variable whereas the rvalue can be either a constant, a variable, the result of an operation or any combination of these.
Code:a = b;
This statement assigns to variable a (the lvalue) the value contained in variable b (the rvalue). The value that was stored until this moment in a is not considered at all in this operation, and in fact that value is lost.
Consider also that we are only assigning the value of b to a at the moment of the assignment operation. Therefore a later change of b will not affect the new value of a.
For example, let us have a look at the following code  I have included the evolution of the content stored in the variables as comments:
Input
Code:// assignment operator #include <iostream> using namespace std; int main () { int a, b; // a:?, b:? a = 10; // a:10, b:? b = 4; // a:10, b:4 a = b; // a:4, b:4 b = 7; // a:4, b:7 cout << "a:"; cout << a; cout << " b:"; cout << b; return 0; }
This code will give us as result that the value contained in a is 4 and the one contained in b7. Notice how a was not affected by the final modification of b, even though we declared a = b earlier (that is because of the righttoleft rule).
A property that C++ has over other programming languages is that the assignment operation can be used as the rvalue (or part of an rvalue) for another assignment operation. For example:
isCode:a = 2 + (b = 5);
is equivalent to:
Code:b = 5; a = 2 + b;
The following expression is also valid in C++:
Code:a = b = c = 5;
It assigns 5 to the all three variables: a, b and c.
Arithmetic operators ( +, , *, /, % )
The five arithmetical operations supported by the C++ language are:
Attachment 3581
Operations of addition, subtraction, multiplication and division literally correspond with their respective mathematical operators. The only one that you might not be so used to see is modulo; whose operator is the percentage sign (%). Modulo is the operation that gives the remainder of a division of two values. For example, if we write:
Code:a = 11 % 3;
the variable a will contain the value 2, since 2 is the remainder from dividing 11 between 3.
Compound assignment (+=, =, *=, /=, %=, >>=, <<=, &=, ^=, =)
When we want to modify the value of a variable by performing an operation on the value currently stored in that variable we can use compound assignment operators:
Attachment 3582
and the same for all other operators. For example:
Input
Code:// compound assignment operators #include <iostream> using namespace std; int main () { int a, b=3; a = b; a+=2; // equivalent to a=a+2 cout << a; return 0; }
Output
Attachment 3583
Increase and decrease (++, )
Shortening even more some expressions, the increase operator (++) and the decrease operator () increase or reduce by one the value stored in a variable. They are equivalent to +=1 and to =1, respectively. Thus:
1
2
3
Code:c++; c+=1; c=c+1;
are all equivalent in its functionality: the three of them increase by one the value of c.
In the early C compilers, the three previous expressions probably produced different executable code depending on which one was used. Nowadays, this type of code optimization is generally done automatically by the compiler, thus the three expressions should produce exactly the same executable code.
A characteristic of this operator is that it can be used both as a prefix and as a suffix. That means that it can be written either before the variable identifier (++a) or after it (a++). Although in simple expressions like a++ or ++a both have exactly the same meaning, in other expressions in which the result of the increase or decrease operation is evaluated as a value in an outer expression they may have an important difference in their meaning: In the case that the increase operator is used as a prefix (++a) the value is increased before the result of the expression is evaluated and therefore the increased value is considered in the outer expression; in case that it is used as a suffix (a++) the value stored in a is increased after being evaluated and therefore the value stored before the increase operation is evaluated in the outer expression. Notice the difference:
Attachment 3584
In Example 1, B is increased before its value is copied to A. While in Example 2, the value of B is copied to A and then B is increased.
Relational and equality operators ( ==, !=, >, <, >=, <= )
In order to evaluate a comparison between two expressions we can use the relational and equality operators. The result of a relational operation is a Boolean value that can only be true or false, according to its Boolean result.
We may want to compare two expressions, for example, to know if they are equal or if one is greater than the other is. Here is a list of the relational and equality operators that can be used in C++:
Attachment 3585
Here there are some examples:
Code:(7 == 5) // evaluates to false. (5 > 4) // evaluates to true. (3 != 2) // evaluates to true. (6 >= 6) // evaluates to true. (5 < 5) // evaluates to false.
Code:(a == 5) // evaluates to false since a is not equal to 5. (a*b >= c) // evaluates to true since (2*3 >= 6) is true. (b+4 > a*c) // evaluates to false since (3+4 > 2*6) is false. ((b=2) == a) // evaluates to true.
Logical operators ( !, &&,  )
The Operator ! is the C++ operator to perform the Boolean operation NOT, it has only one operand, located at its right, and the only thing that it does is to inverse the value of it, producing false if its operand is true and true if its operand is false. Basically, it returns the opposite Boolean value of evaluating its operand. For example:
Code:!(5 == 5) // evaluates to false because the expression at its right (5 == 5) is true. !(6 <= 4) // evaluates to true because (6 <= 4) would be false. !true // evaluates to false !false // evaluates to true.
evaluating the expression
Attachment 3589
'The operator  corresponds with Boolean logical operation OR. This operation results true if either one of its two operands is true, thus being false only when both operands are false themselves. Here are the possible results of a  b:'
Attachment 3590
For example:
Code:( (5 == 5) && (3 > 6) ) // evaluates to false ( true && false ). ( (5 == 5)  (3 > 6) ) // evaluates to true ( true  false ).
from left to right to come up with the combined relational result,
ignoring the rest. Therefore, in this last example ((5==5)(3>6)), C++ would evaluate first whether 5==5 is true, and if so, it would never check whether 3>6 is true or not. This is known as shortcircuit evaluation, and works like this for these operators:
Attachment 3591
This is mostly important when the righthand expression has side effects, such as altering values:
Code:if ((i<10)&&(++i<n)) { /*...*/ }
This combined conditional expression increases i by one, but only if the condition on the left of && is true, since otherwise the righthand expression (++i<n) is never evaluated.
Conditional operator ( ? )
The conditional operator evaluates an expression returning a value if that expression is true and a different one if the expression is evaluated as false. Its format is:
condition ? result1 : result2
If condition is true the expression will return result1, if it is not it will return result2.
Code:7==5 ? 4 : 3 // returns 3, since 7 is not equal to 5. 7==5+2 ? 4 : 3 // returns 4, since 7 is equal to 5+2. 5>3 ? a : b // returns the value of a, since 5 is greater than 3. a>b ? a : b // returns whichever is greater, a or b.
[IMG]file:///C:/Users/SHAHZAD/AppData/Local/Temp/mozscreenshot5.png[/IMG][IMG]file:///C:/Users/SHAHZAD/AppData/Local/Temp/mozscreenshot6.png[/IMG]Code:// conditional operator #include <iostream> using namespace std; int main () { int a,b,c; a=2; b=7; c = (a>b) ? a : b; cout << c; return 0; }
Output
Attachment 3592
In this example a was 2 and b was 7, so the expression being evaluated (a>b) was not true, thus the first value specified after the question mark was discarded in favor of the second value (the one after the colon) which was b, with a value of 7.
Comma operator ( , )
The comma operator (,) is used to separate two or more expressions that are included where only one expression is expected. When the set of expressions has to be evaluated for a value, only the rightmost expression is considered.
For example, the following code:
Code:a = (b=3, b+2);
Would first assign the value 3 to b, and then assign b+2 to variable a. So, at the end, variable a would contain the value 5 while variable b would contain value 3.
Bitwise Operators ( &, , ^, ~, <<, >> )
Bitwise operators modify variables considering the bit patterns that represent the values they store
Attachment 3593
Explicit type casting operator
Type casting operators allow you to convert a datum of a given type to another. There are several ways to do this in C++. The simplest one, which has been inherited from the C language, is to precede the expression to be converted by the new type enclosed between parentheses (()):
Code:int i; float f = 3.14; i = (int) f;
Code:i = int ( f );
Both ways of type casting are valid in C++.
sizeof()
This operator accepts one parameter, which can be either a type or a variable itself and returns the size in bytes of that type or object:
Code:a = sizeof (char);
This will assign the value 1 to a because char is a onebyte long type.
The value returned by sizeof is a constant, so it is always determined before program execution.
Other operators
Later in these tutorials, we will see a few more operators, like the ones referring to pointers or the specifics for objectoriented programming. Each one is treated in its respective section.
Precedence of operators
When writing complex expressions with several operands, we may have some doubts about which operand is evaluated first and which later. For example, in this expression:
Code:a = 5 + 7 % 2
we may doubt if it really means:
Code:a = 5 + (7 % 2) // with a result of 6, or a = (5 + 7) % 2 // with a result of 0
There is an established order with the priority of each operator, and
not only the arithmetic ones (those whose preference come from
mathematics) but for all the operators which can appear in C++. From
greatest to lowest priority, the priority order is as follows:
Attachment 3594
Grouping defines the precedence order in which operators are evaluated
in the case that there are several operators of the same level in an
expression.
All these precedence levels for operators can be manipulated or become
more legible by removing possible ambiguities using parentheses signs ( and ), as in this example:
Code:a = 5 + 7 % 2;
Code:a = 5 + (7 % 2);
Code:a = (5 + 7) % 2;
So if you want to write complicated expressions and you are not completely sure of the precedence levels, always include parentheses. It will also make your code easier to read.
Last edited by Їийоcёйт Кїllєґ; 05242011 at 06:32 AM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Islam Kiya Hai
3 Weeks Ago in Syed Hashmi Miyan Ashrafi Jeelani