Results 1 to 3 of 3
Thread: Hardware notes class 8th
- Join Date
- Feb 2010
- Rep Power
Hardware notes class 8th
Chapter 7. The south bridge http://www.xitclub.com/showthread.ph...ass-8th&p=1122
The south bridge incorporates a number of different controller functions. It looks after the transfer of data to and from the hard disk and all the other I/O devices, and passes this data into the link channel which connects to the north bridge.
In Fig. 44 you can clearly see that the south bridge is physically located close to the PCI slots, which are used for I/O devices.
Fig. 47. The chipsetÃ¢â‚¬â„¢s south bridge combines a number of controller functions into a single chip. The various chipset manufacturers
Originally it was basically only Intel who supplied the chipsets to be used in motherboards. This was quite natural, since Intel knows everything about their own CPUÃ¢â‚¬â„¢s and can therefore produce chipsets which match them. But at the time the Pentium II and III came out, other companies began to get involved in this market. The Taiwanese company, VIA, today produces chipsets for both AMD and Intel processors, and these are used in a large number of motherboards.
Other companies (like SiS, nVidia, ATI and ALi) also produce chipsets, but these havenÃ¢â‚¬â„¢t (yet?) achieved widespread use. The CPU manufacturer, AMD, produces some chipsets for their own CPUÃ¢â‚¬â„¢s, but they also work together closely with VIA as the main supplier for Athlon motherboards.
Fig. 48. The Taiwanese company, VIA, has been a leader in the development of new chipsets in recent years. Since all data transfers are managed by the chipsetÃ¢â‚¬â„¢s two bridges, the chipset is the most important individual component on the motherboard, and new chipsets are constantly being developed.
The chipset determines the limits for clock frequencies, bus widths, etc. The chipsetÃ¢â‚¬â„¢s built-in controllers are also responsible for connecting I/O devices like hard disks and USB ports, thus the chipset also determines, in practise, which types of devices can be connected to the PC.
Fig. 49. The two chips which make up a typical chipset. Here we have VIAÃ¢â‚¬â„¢s model P4X266A, which was used in early motherboards for Pentium 4 processors. Sound, network, and graphics in chipsets
Developments in recent years have led chipset manufacturers to attempt to place more and more functions in the chipset.
These extra functions are typically:
Video card (integrated into the north bridge)
Sound card (in the south bridge)
Modem (in the south bridge)
Network and Firewire (in the south bridge) All these functions have traditionally been managed by separate devices, usually plug-in cards, which connect to the PC. But it has been found that these functions can definitely be incorporated into the chipset.
Fig. 50. Motherboard with built-in sound functionality. Intel has, for many years, managed to produce excellent network cards (Ethernet 10/100 Mbps); so it is only natural that they should integrate this functionality into their chipsets.
Sound facilities in a chipset cannot be compared with Ã¢â‚¬Å“realÃ¢â‚¬Â sound cards (like, for example, Sound Blaster Audigy). But the sound functions work satisfactorily if you only want to connect a couple of small speakers to the PC, and donÃ¢â‚¬â„¢t expect perfect quality.
Fig. 51. This PC has two sound cards installed, as shown in this Windows XP dialog box. The VIA ACÃ¢â‚¬â„¢97 is a sound card emulation which is built into the chipset. Many chipsets also come with a built-in video card. The advantage is clear; you can save having a separate video card, which can cost a $100 or more.
Again, the quality canÃ¢â‚¬â„¢t be compared with what you get with a separate, high quality, video card. But if you donÃ¢â‚¬â„¢t particularly need support for multiple screens, DVI (for flat screens), super 3D performance for games, or TV-out, the integrated graphics controller can certainly do the job.
Fig. 52. This PC uses a video card which is built into the Intel i810 chipset. It is important that the integrated sound and graphics functions can be disabled, so that you can replace them with a real sound or video card. The sound functions wonÃ¢â‚¬â„¢t cause any problems; you can always ask Windows to use a particular sound card instead of another one.
But the first Intel chipset with integrated graphics (the i810) did not allow for an extra video card to be installed. That wasnÃ¢â‚¬â„¢t very smart, because it meant users were locked into using the built-in video card. In the subsequent chipset (i815), the problem was resolved.
Buying a motherboard
If you want to build a PC yourself, you have to start by choosing a motherboard. It is the foundation for the entire PC.
Most of the motherboards on the market are produced in Taiwan, where manufacturers like Microstar, Asus, Epox, Soltek and many others supply a wide range of different models. Note that a producer like Microstar supplies motherboards to brand name manufacturers like Fujitsu-Siemens, so you can comfortably trust in the quality. Taiwan is the leader in the area of motherboards.
The first issue to work out is, which CPU you want to use. For example, if you want to use a Pentium 4 from Intel, there is one line of motherboards you can choose between. If you choose an AthlonXP, there is another line. And the difference lies in which chipset is being used in the motherboard.
Fig. 53. A typical (technical) advertisement for a motherboard. Once you have decided on a processor, you should try to get a motherboard with the latest chipset available, because new versions of chipsets continue to be released, with greater functionality. At the time of writing, for example, chipsets often include these functions:
USB version 2.0.
Dual channel RAM.
Support for 400 and 533 MHz DDR2 RAM.
Integrated Firewire ports.
Gigabit Ethernet. You will most likely want to have these facilities (which are described later in the guide) on your PC. That is why it is important to choose the right motherboard with the latest generation chipset.
In addition, it can sometimes be worth choosing a motherboard which has extra facilities. For example, all manufacturers have Ã¢â‚¬Å“luxury modelsÃ¢â‚¬Â with built-in RAID controllers, making it possible to install several hard disks. There are motherboards around with loads of extra facilities, such as:
Built-in RAID or (seldom) SCSI controller.
Other network, screen and sound facilities.
SmartCard/MemoryStick/etc. readers. One of the advantages of building your own PC is that you can choose a really exciting motherboard.
Development is taking place rapidly, and by choosing the right motherboard, you can design the absolute latest PC on the market.
You can also find hundreds of articles on the Internet about each motherboard and chipset. So I can comfortably recommend you build your own PC, as long as you do your homework first! Make sure you read the rest of the guide before you start choosing a new motherboard!
Nice sharing good work
- Join Date
- Dec 2010
- Kingdom of Bahrain
- Rep Power
nice tutorial, thanx...
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By $$$lover in forum Computer HardwareReplies: 3Last Post: 12-19-2010, 11:17 PM
By $$$lover in forum Computer HardwareReplies: 0Last Post: 03-02-2010, 08:43 AM
By $$$lover in forum Computer HardwareReplies: 1Last Post: 03-01-2010, 10:45 PM
By $$$lover in forum Computer HardwareReplies: 1Last Post: 03-01-2010, 10:44 PM
By $$$lover in forum Computer HardwareReplies: 1Last Post: 03-01-2010, 10:43 PM